Ethernet Cable Bandwidth Chart
Rated frequency in MHz, channel and permanent-link lengths, and standards recognition for each common Ethernet category. “Bandwidth” here means rated frequency, not Ethernet throughput.
Rated frequency comparison
Frequency, channel and permanent link
| Category | ISO class | Rated frequency | Maximum channel | Permanent link |
|---|---|---|---|---|
| Cat5e | Class D | 100 MHz | 100 m | 90 m |
| Cat6 | Class E | 250 MHz | 100 m | 90 m |
| Cat6A | Class EA | 500 MHz | 100 m | 90 m |
| Cat7 | Class F | 600 MHz | 100 m | 90 m |
| Cat7A | Class FA | 1,000 MHz | 100 m | 90 m |
| Cat8 | Class I (Cat8.1) / Class II (Cat8.2) | 2,000 MHz | 30 m | 24 m |
Channel vs permanent link. A channel is the entire end-to-end path, including the permanent link plus patch cords and equipment cords. The 90 m permanent-link allowance is not an additional 90 m on top of the 100 m channel — it is the portion of the 100 m budget typically allocated to the fixed cable run.
Standards recognition
| Category | ANSI/TIA status | ISO/IEC status |
|---|---|---|
| Cat5e | ANSI/TIA recognized | ISO/IEC recognized |
| Cat6 | ANSI/TIA recognized | ISO/IEC recognized |
| Cat6A | ANSI/TIA recognized | ISO/IEC recognized |
| Cat7 | Not an ANSI/TIA category | ISO/IEC recognized |
| Cat7A | Not an ANSI/TIA category | ISO/IEC recognized |
| Cat8 | TIA Category 8 / Class I equivalent | recognized as Cat8.1 and Cat8.2 |
Cat7 and Cat7A are ISO categories, not TIA categories.ISO/IEC Class F (Cat7) and Class FA (Cat7A) are recognized by ISO/IEC 11801 but not by ANSI/TIA-568. Full Class F / Class FA channel performance also requires the appropriate ISO-compliant connector system (GG45 or TERA typically) — a product sold as “Cat7 RJ45” should not be assumed to deliver full Class F channel performance.
Category-specific qualifications
Cat5e — Class D
State the 1 Gb/s at 100 m baseline. Do not imply every Cat5e product supports every multi-gigabit PHY at 100 m.
Cat6 — Class E
Never present 10 Gb/s over Cat6 as a guaranteed 100 m link. Publish the conditional 37–55 m range with field-test and alien-crosstalk caveats.
Cat6A — Class EA
Distinguish 90 m permanent link from 100 m channel. Do not equate 500 MHz bandwidth with a 500 Mb/s or 500 Gb/s data rate.
Cat7 — Class F
Explain that Cat7 is an ISO/IEC category/Class F, not an ANSI/TIA-recognized category. Avoid the unqualified phrase 'TIA Cat7'.
Cat7A — Class FA
Clearly separate Class FA's 1000 MHz cabling performance from the Ethernet data rate. Do not claim Cat7A delivers 40 Gb/s Ethernet over 50 m as a general standard capability.
Cat8 — Class I (Cat8.1) / Class II (Cat8.2)
Always show 30 m channel / 24 m permanent link and identify the Cat8.1/Class I versus Cat8.2/Class II distinction. Do not market Cat8 as a 100 m 25/40G solution.
Related reference
Sources
- ANSI/TIA-568.2-E: Balanced Twisted-Pair Telecommunications Cabling and Components StandardTelecommunications Industry Association (TIA)
- ISO/IEC 11801-1:2017/Amd 1:2025: Information technology — Generic cabling for customer premises — Part 1: General requirementsISO / IEC (JTC 1/SC 25)
- IEEE Std 802.3-2022: IEEE Standard for Ethernet (incorporating 802.3ab, 802.3an, 802.3bq, and 802.3bz)IEEE Standards Association (IEEE 802.3 Working Group)
- Copper Structured Cabling Design Guide, Issue 10Belden
- Standards Comparison, Version 3.0 / 2024Datwyler IT Infra
- Ethernet Cable Categories Explained: A Brief HistoryFluke Networks
- TIA TSB-155-A: Guidelines for the Assessment and Mitigation of Installed Category 6 Cabling to Support 10GBASE-TTelecommunications Industry Association (TIA)
- 10 Gigabit Ethernet over Twisted-pair CopperEthernet Alliance
- What Ever Happened to Category 7?Fluke Networks
- Category 8 Questions AnsweredSiemon / Cabling Installation & Maintenance